Products

  • HOME
  • Lathe Series-Lathe Series
  • FUL-900

All Products

Lathe Series-Lathe Series - FUL-900

FUL-900 Download

Model 　 　
Swing over bed (radius) 900 / (35.4") mm/(inch)
Center height 450 / (17.7") mm/(inch)
Swing over cross slide (dia.) 600 / (23.6") mm/(inch)
Distance between centers 1140 / (44.8")
2140 / (84.3")
3140 / (123.6")
4000 / (157.5")		 mm/(inch)
Width of bed 550 / (21.6") mm/(inch)
Spindle bore
Spindle speeds
Spindle nose		 φ155mm (6-800rpm - 4steps) (A2-11)
φ250mm (4-600rpm - 4steps) (A2-15)
φ305mm (4-600rpm - 4steps) (A2-20)
φ380mm (4-400rpm - 4steps) (A2-20)		 mm/(inch)
rpm
 

Specifications

  • Machine characteristics
  • video
  • Specification Table




​
[Download]
Model 　 　
Swing over bed (radius) 900 / (35.4") mm/(inch)
Center height 450 / (17.7") mm/(inch)
Swing over cross slide (dia.) 600 / (23.6") mm/(inch)
Distance between centers 1140 / (44.8")
2140 / (84.3")
3140 / (123.6")
4000 / (157.5")		 mm/(inch)
Width of bed 550 / (21.6") mm/(inch)
Headstock 　 　
Spindle bore
Spindle speeds
Spindle nose		 φ155mm (6-800rpm - 4steps) (A2-11)
φ250mm (4-600rpm - 4steps) (A2-15)
φ305mm (4-600rpm - 4steps) (A2-20)
φ380mm (4-400rpm - 4steps) (A2-20)		 mm/(inch)
rpm
​
Taper in spindle MT 7# 　
Saddle    
Longitudinal travel (Z axis) 1030 / (40.5")
2030 / (80")
3030 / (119.3")
3830 / (150.8")		 mm/(inch)
Cross slide travel (X axis) 550 / (21.7") mm/(inch)
Tailstock    
Quill diameter 105 (4.1") / 120 (4.9") (op.) mm/(inch)
Travel 275 / (10.8") mm/(inch)
Taper MT 6# 　
Motor    
Spindle motor 22 / (30)
30 /(40) (op.)		 KW/HP
Ballscrews for X & Z axis X:40mm x pitch 5
Z:63mm x pitch10		  
Drives (x, z axis) DC SERVO
AC SERVO(op.)		 　
Coolant pump motor 1/8HP (90W) /
1/4HP (180W)(op.)		 HP(W)
(X,Z axis) drives   　
Motor torque X: 12NM    Z: 22NM NM
Rapid traverse (X, Z axis) X: 6M/min
Z: 8M/min		 M/ min
Machine net weight  900 x 1030 : 4650KG
900 x 2030 : 5150KG
900 x 3030 : 6150KG
900 x 3830 : 7150KG		 KG
 *Special subject to change without notice.
BACK