Products
All Products
GM Series-GM Series - GM-1(1470)
GM-1(1470) Download
| TABLE | ||
| Table size (L*W) | 1500*650/59.05*25.59 | mm/(inch) |
| X axis travel range | 1100/43.3" | mm/(inch) |
| Y axis travel range | 650/25.6" | mm/(inch) |
| Z axis travel range | 720/28.3" | mm/(inch) |
| Max table load | 700/1560 | (kg/lbs) |
| Spindle nose to table surface(Vertical) | 30~750/1.2"~29.53" | mm/(inch) |
| Spindle nose to table surface(Horizontal) | 275~995/10.8"~39.1" | mm/(inch) |
Specifications
- Machine characteristics
- video
- Specification Table
Structure
[Download]
*All specifications and designs are subject to change without notice.
| TABLE | ||
| Table size (L*W) | 1500*650/59.05*25.59 | mm/(inch) |
| X axis travel range | 1100/43.3" | mm/(inch) |
| Y axis travel range | 650/25.6" | mm/(inch) |
| Z axis travel range | 720/28.3" | mm/(inch) |
| Max table load | 700/1560 | (kg/lbs) |
| Spindle nose to table surface(Vertical) | 30~750/1.2"~29.53" | mm/(inch) |
| Spindle nose to table surface(Horizontal) | 275~995/10.8"~39.1" | mm/(inch) |
| T slot | 18*100*5 | (W*D*N mm) |
| ROTARY TABLE | ||
| C axis D.D. Motor (FANUC / ETEL) | FANUC DiS250/250(A06B-0495-B200) 200V Liquid cooling /ETEL TMB0291-70 |
|
| Table diameter | Ø500/ Ø19.68 | (mm/inch) |
| Center bore diameter | Ø50/ Ø1.96 | (mm/inch) |
| Rotation speed | 22.2 | (rpm) |
| Minimum index | 0.001 | |
| Max table load | 550/1225 | (kg/lbs) |
| B axis rated torque (FANUC / SIEMENS / HEIDENHAIN) | α12(12Nm)/ 1FK7063(11Nm)/ QSY155B(13Nm) | |
| C axis rated torque (Nm) (FANUC / ETEL) | 225/356 | |
| Built-in spindle | ||
| Spindle taper | BT40/BBT40/HSK-A63 | |
| Spindle center to column | 750/29.52 | (mm/inch) |
| Spindle speed | 15000 | |
| Motor type (FANUC / ATE) | FANUC Bil112S/ATE-170 | kw/NM |
| Spindle motor (KW) (FANUC / ATE) | 5.5-7.5/21-25 | (rpm) |
| Motor torque (Nm) (FANUC / ATE) | 44-60/ 69-83 | |
| SWING HEAD | ||
| Drive type | WORM GEAR / OP D/D MOTOR TMB+0290-150 | |
| Reduction ratio | 1：90 / 1： 1 | |
| Tilting range | ±120 / ±120 | (degree) |
| Max speed | 16.7 / 40-50 | (rpm) |
| Minimum unit | 0.001 / 0.001 | |
| Working torque | 350 / 782 | (Nm) |
| AXIS SERVO MOTORS | ||
| Rapid feed rate (X/Y/Z) | 36/36/24 (1417/1417/945) | m/min (inch/min) |
| Feed rate (X/Y/Z) | 10 (394) | m/min (inch/min) |
| Rated torque for X,Y,Z axes (FANUC / SIEMENS / | α22(22Nm)/ 1FK7083(16Nm)/ QSY155C(17.7Nm) |
|
| ACCURACY | ||
| Positioning for XYZ axes | 0.005/ 0.0002 | (mm/inch) |
| BC rotary (sec)-Undirectional | 4" | |
| Repeatability for XYZ axes | 0.005/ 0.0002 | (mm/inch) |
| BC rotary (sec)-Bidirectional | 8" | |
| OTHER | ||
| Air requirement | 6 | (kg/cm) |
| Voltage | 380 | |
| Power requirement (KVA) | 40 | |
| Coolant tank capacity (L) | 280 | |
| Machine weight | 7200 / 16000 | (kg/lbs) |
| Floor space (L*W) | 4*2.5 / 157.5*98.5 | m/inch |
| Packing size (L*W*H) | 3*2.5*3 / 118.1*98.5*118.1 | m/inch |