Products
All Products
GLG Series-GLG Series - GLG-1170
GLG-1170 Download
| TRAVEL | ||
| X-axis | 1100 (43.3") | mm/(inch) |
| Y-axis | 700 (27.5") | mm/(inch) |
| Z-axis | 650 (25.5") | mm/(inch) |
| Spindle nose to table surface | 100-750 (3.9"-29.5") | mm/(inch) |
| Spindle center to column surface | 765(30") | mm/(inch) |
| X.Y.Z. Axis Ball screws dia | 40 x Pitch12 | mm/(inch) |
| TABLE | ||
| Table Size | 1200 x 650 (47.2" x 25.5") | mm/(inch) |
| Working Area | 1100x 650 (43.3" x 25.5") | mm/(inch) |
| Tee slots (CD x W x NO) | CD100 x 18 x 5 | mm/(inch) |
| Table load (maximun) | 1100(2420) | KG(Ibs) |
Specifications
- Machine characteristics
- video
- Specification Table
[Download]
*All specifications and designs are subject to change without notice.
| TRAVEL | ||
| X-axis | 1100(43.3") | mm/(inch) |
| Y-axis | 700(27.5") | mm/(inch) |
| Z-axis | 650(25.5") | mm/(inch) |
| Spindle nose to table surface | 100-750 (3.9"-29.5") | mm/(inch) |
| Spindle center to column surface | 765(30") | mm/(inch) |
| X.Y.Z. Axis Ball screws dia | 40 x Pitch12 | mm/(inch) |
| TABLE | ||
| Table Size | 1200 x 650 (47.2" x 25.5") | mm/(inch) |
| Working Area | 1100x 650 (43.3" x 25.5") | mm/(inch) |
| Tee slots (CD x W x NO) | CD100 x 18 x 5 | mm/(inch) |
| Table load (maximun) | 1100(2420) | KG(Ibs) |
| SPINDLE | ||
| Spindle tapper | BT 40 / CAT 40 (opt: BT 50) | |
| Spindle speed - standard access | BT30 / 12,000 / opt 15,000 (Belt drive) Direct drive 15,000/20,000 rpm | RPM |
| Compatible with various types of spindels - Belt drive |
BT40 8,000 / 10,000 / 12,000 BT50 8,000 / 10,000 | RPM |
| Compatible with various types of spindels - Direct drive Spindle |
opt BT40 10,000/12,000/15,000-Direct drive BT50 10,000/12,000-Direct drive | RPM |
| Compatible with various types of spindels - Built-in drive Spindle |
opt BT40 16,000/20,000/24,000/30,000-Built in BT 50 12,000/15,000/20,000 – Built in | RPM |
| FEEDRATE | ||
| Cutting Feedrate (X, Y, Z axis) | 1-10000(Depending Controller) | MM/MIN |
| 3Axes Slideways | LINEAR BALL SLIDE, opt: LINEAR ROLL SLIDE | |
| Rapid Traverse Rates (X/Y/Z axis) | 30/30/24 | MM/MIN |
| ATC | ||
| Capacity-standard access. | 24 (Arm) | PCS |
| Capacity-optional access.(ARM) | 32/40(Chain Type), 30(Arm) | PCS |
| Tool Selection | Bi-directional & min.path | |
| Maximum tool diameter x length | Armless Type: 80 x 250(3.1"x9.8"), Arm Type: 80 x 250(3.1"x9.8") | MM(inch) |
| Maximum tool weight | Armless6(13.2) / Arm 8(17.6) | KG(lbs) |
| Air Power required | 6kg / cm2 | |
| Tool Shank | BT40, ISO40 or CAT40 (Option) | |
| MOTOR | ||
| Spindle drive Motor | Std: 7.5KW(10HP), opt: 11KW(15HP) | KW(HP) |
| LINEAR BALL SLIDE | ||
| X/Y/Z axis | 45x2sets / 30x4sets / 45x2sets | |
| Carriage guide block-per axis | 6 / 8 / 6 blocks | |
| Coolant Pump | 1/2 | HP |
| Power Supply | STD: 20KVA | |
| NET WEIGHT | 6600(14520) | KG(lbs) |
| SIZE | ||
| A | 295 | cm |
| B | 226 | cm |
| C | 190 | cm |
| D | 84 | cm |
| E | 310/320 | cm |