Products
All Products
GM Series-GM Series - GM-2(2080)
GM-2(2080) Download
| TABLE | ||
| Table size (L*W) | 2000*800 / 78.74*31.49 | mm/(inch) |
| X axis travel range | 1900/ 74.80 | mm/(inch) |
| Y axis travel range | 800/ 31.50 | mm/(inch) |
| Z axis travel range | 700/ 27.56 | mm/(inch) |
| Max table load | 1200/ 2670 | (kg/lbs) |
| Spindle nose to table surface(Vertical) | 30~800/ 1.2"~31.5" | mm/(inch) |
| Spindle nose to table surface(Horizontal) | 275~1045/ 10.8"~41.4" | mm/(inch) |
Specifications
- Machine characteristics
- video
- Specification Table
Structure
.jpg)
[Download]
*All specifications and designs are subject to change without notice.
| TABLE | ||
| Table size (L*W) | 2000*800 / 78.74*31.49 | mm/(inch) |
| X axis travel range | 1900/ 74.80 | mm/(inch) |
| Y axis travel range | 800/ 31.50 | mm/(inch) |
| Z axis travel range | 700/ 27.56 | mm/(inch) |
| Max table load | 1200/ 2670 | (kg/lbs) |
| Spindle nose to table surface(Vertical) | 30~800/ 1.2"~31.5" | mm/(inch) |
| Spindle nose to table surface(Horizontal) | 275~1045/ 10.8"~41.4" | mm/(inch) |
| T slot | 18*100*8 | (W*D*N mm) |
| ROTARY TABLE | ||
| C axis D.D. Motor (FANUC / ETEL) | FANUC DiS500/250(A06B-0495-B200) 200V Liquid cooling / ETEL TMB3060-070 |
|
| Table diameter | Ø630/ Ø24.8 | (mm/inch) |
| Center bore diameter | Ø60/ Ø2.36 | (mm/inch) |
| Rotation speed | 40~50 | (rpm) |
| Minimum index | 0.001 | |
| Max table load | 900/ 2000 | (kg/lbs) |
| B axis rated torque (FANUC / SIEMENS / HEIDENHAIN) | α12(12Nm)/ 1FK7083(16Nm)/ QSY155C(17.7Nm) |
|
| C axis rated torque (Nm) (FANUC / ETEL) | 520/554 | |
| Built-in spindle | ||
| Spindle taper | BT40/BBT40/HSK-A63 | |
| Spindle center to column | 850 / 33.46 | (mm/inch) |
| Spindle speed | 15000 | |
| Motor type (FANUC / ATE) | FFANUC Bil112L/ATE-180 | kw/NM |
| Spindle motor (KW) (FANUC / ATE) | 15-18.5/ 27-35 | (rpm) |
| Motor torque (Nm) (FANUC / ATE) | 95-167/ 93-113 | |
| SWING HEAD | ||
| Drive type | WORM GEAR / OP D/D MOTOR TMB+0290-150 | |
| Reduction ratio | 1：90 / 1： 1 | |
| Tilting range | ±120 / ±120 | (degree) |
| Max speed | 16.7 / 40-50 | (rpm) |
| Minimum unit | 0.001 / 0.001 | |
| Working torque | 350 / 782 | (Nm) |
| AXIS SERVO MOTORS | ||
| Rapid feed rate (X/Y/Z) | 24/24/24 (945/ 945/ 945) | m/min (inch/min) |
| Feed rate (X/Y/Z) | 10 (394) | m/min (inch/min) |
| Rated torque for X,Y,Z axes (FANUC / SIEMENS / | α30(30Nm)/ 1FK7101(27Nm)/ QSY190C(28Nm) |
|
| ACCURACY | ||
| Positioning for XYZ axes | 0.005/ 0.0002 | (mm/inch) |
| BC rotary (sec)-Undirectional | 4" | |
| Repeatability for XYZ axes | 0.005/ 0.0002 | (mm/inch) |
| BC rotary (sec)-Bidirectional | 8" | |
| OTHER | ||
| Air requirement | 6 | (kg/cm) |
| Voltage | 380 | |
| Power requirement (KVA) | 40 | |
| Coolant tank capacity (L) | 280 | |
| Machine weight | 11000 / 24450 | (kg/lbs) |
| Floor space (L*W) | 5.2*3/ 205*118.1 | m/inch |
| Packing size (L*W*H) | 6.5*3*3.5 / 256*118.1*137.8 | m/inch |